Author: admin

Silicone casting can produce crisp shapes, smooth surfaces and repeatable resin pieces, but the mould alone does not guarantee a good result. Accurate measuring, careful mixing, controlled pouring and enough curing time all affect the finished casting. This guide focuses specifically on casting resin into ready-made silicone moulds. It does not cover making a silicone […]

If you have ever paused before a project and wondered whether epoxy resin or UV resin is the better choice, you are not alone. They can look similar before use, but they cure differently, suit different project sizes and give you very different amounts of working time. The best option depends on what you are making. Epoxy […]

A resin piece can look flawless in the mould, then disappoint the moment it cures if the pigment was the wrong choice. That is why choosing the best pigments for epoxy matters just as much as choosing the resin itself. The right pigment gives you the finish you want, behaves well in the mix, and […]

If you have ever poured resin into a mould, waited hours, and then checked it every twenty minutes anyway, UV resin can feel like a small miracle. This beginner guide to UV resin is for makers who want quicker results, less mixing, and a simpler way to start creating jewellery, charms, keyrings, domes and glossy […]

A clear pour can turn cloudy in seconds once tiny bubbles start rising through the mix. If you have been wondering how to remove bubbles from resin without ruining your mould, overworking the surface or wasting a batch, the good news is that most bubble problems are preventable and fixable with a few simple changes. […]

Many people discover epoxy resin after seeing beautiful handmade coasters, jewellery, decorative trays or creative castings online. It looks straightforward, but getting started can feel overwhelming when you’re faced with different resins, pigments, moulds and accessories. This guide focuses specifically on epoxy resin kits for beginners. Rather than comparing individual resin products, it explains what a […]

Silicone casting can produce crisp shapes, smooth surfaces and repeatable resin pieces, but the mould alone does not guarantee a good result. Accurate measuring, careful mixing, controlled pouring and enough curing time all affect the finished casting. This guide focuses specifically on casting resin into ready-made silicone moulds. It does not cover making a silicone […]

A silicone mould can define the shape, scale and surface character of a resin project before any resin is mixed. Choosing one therefore involves more than finding an appealing design. The cavity dimensions, depth, finish, component arrangement and requirements of the intended resin all need to suit the result you have in mind. This guide […]

You finish a crystal-clear resin piece, leave it on display for a while, then notice a warm amber tint where there used to be glass-like clarity. So, does resin yellow over time? In most cases, yes. Clear resin is not completely immune to ageing, and exposure to ultraviolet light, heat and oxygen can gradually alter its appearance. […]

A batch of crystal-clear resin can turn cloudy, tacky or full of surprises the moment the wrong colourant goes in. If you are wondering how to colour resin safely, the good news is that it is not complicated – but it does depend on using the right additives, the right amount, and the right protective […]